GTune 1.0 Download

GTune 1.0 Description

"GTune is a chromatic instrument tuner which operates much like similar hardware."

Edit By BS Editor: GTune is a Chromatic Instrument Tuner which operates much like similar hardware units. It will automatically Detect the pitch of a note being played, and display the closest corresponding Western scale note.
You then change the pitch of your instrument, using the "LED"-like indicators and the numerical read-out in order to bring your instrument quickly and accurately into tune.
Hints
• Guitar-players should use a neck pick-up if available, as it generally carries more of the fundamental tone needed for tracking. That said, Freedom from a noisy signal is more important, so try different pick- up selections to see which works best for you.
• Use a fairly "hot" signal, as detection will be more accurate and the note's pitch will be tracked for longer.
• Minimize noise in the signal as much as possible, but do not use a "gate" effect to do so.
Interface

The GUI has four parts. From top to bottom these are the reference Frequency control, the main display, the coarse-tune "LED" indicators and the frequency readout.
Reference Frequency: This controls the frequency of the A above Middle-C, usuall 440Hz.
Main Display: The main display displays the Western scale note to which the currently-played note is closest.
LED: "Lights" to the left of centre indicate that your note is flat compared to the target note shown in the main display. "Lights" to the right indicate that you are sharp. If the middle "light" is activated, you are essentially in tune.
Frequency Readout: The small window at the bottom of the GUI displays the frequency of the note you are playing, in Hz. To the right of this, you are told in cents how flat (-) or sharp (+) your instrument is, compared to the target note. Handy for fine-tuning your instrument! you can free download GTune 1.0 now.

GTune 1.0 Keywords

guitar tune gtune

GTune 1.0 Related Software

• GLow
  GLow is a resonant low-pass filter.
• GGrain
  GGrain is a granular resynthesis effect.
• GNormal
  GNormal tries to remedy denormal problems.
• GComp
  GComp is a general-purpose compressor that offers a host of very useful features
• GBand
  GBand is a resonant band-pass filter.
• Gsmith2
  GSinth2 is a monophonic VSTi with three oscillators.
• GFader
  It's a volume knob. A knob to control volume. You know, also known as
• GTune
  GTune is a chromatic instrument tuner which operates much like similar hardware.
• 
  GSnap is an auto-tune effect.
• GRevDly
  GRevDly is a delay effect that plays the delayed signal in reverse.
• GChorus
  GChorus is a traditional chorus effect.
• GGate
  GGate is a noise gate.
• GMax
  GMax is a maximizing limiter.
• GMulti
  GMulti is a three-band compressor with stereo enhancement.
• GComp2
  GComp2 is a simplified compressor that also includes lo- and hi-cut filters.
• GGain
  t's a volume knob. A knob to control volume. You know, also known as
• GDelay
  GDelay is a digital delay effect, with the option to feed the resulting signal.
• GClip
  GClip is a wave-shaping signal clipper.
• GSinth
  GSinth is a monophonic VSTi with three sine oscillators.
• GDuckDly
  GDuckDly is a digital delay that allows the wet signal to be compressed.