GSinth 1.0 Download

GSinth 1.0 Description

"GSinth is a monophonic VSTi with three sine oscillators."

GSinth is a monophonic VSTi with three sine oscillators. It also features an LFO for controlling the output level.

Hints
Each oscillator has its own "Attack" and "Portamento" setting, allowing interesting, evolving sounds to be created.
The best way to get a feeling for GSinth is by using the "Random" button and then tweaking the parameters.
The "Random" button can create extremely inharmonic sounding settings because of the "Detune" parameters. Holding down "Shift" while clicking on the "Random" button creates better-behaved presets.
Interface


Each knob is laid out the same way for consistent and easy reference. Above each one, its function is labelled. Below each one is a numerical readout of the value assigned. There are also two buttons to aid configuration, "Random" and "AutoLevel".

Oscillator Controls
Many parameters are repeated for each oscillator, e.g. "Cent", "Attk", etc. Each of these parameters will be described only once below.

Partial: This controls the Frequency of the oscillator. The first oscillator is fixed to play at the frequency implied by the depressed MIDI key. The remaining two oscillators play at a multiple of that frequency, set by this parameter.

Detune: This allows each oscillator to be detuned by up to a semitone (100 cents) sharp or flat. Attk and Rel: Defines the envelope of the oscillator, i.e. the time taken to reach full volume after a key is pressed and the time taken to reach silence after the key is released.

Porta: Controls the portamento of the oscillator, i.e. the time taken for the oscillator to "slide" from one note to the next.

Level: The level of the oscillator.

LFO Controls
The LFO is used to modulate the overall output level. It is synchronised to the start of each bar. Three parameters describe the LFO shape, frequency and the modulation depth.

LFOWave: The wave-shape of the LFO, e.g. Sine.

LFOFreq: The frequency of the LFO in cycles per bar. you can free download GSinth 1.0 now.

GSinth 1.0 Keywords

GSinth 1.0 Related Software

• GChorus
  GChorus is a traditional chorus effect.
• GGrain
  GGrain is a granular resynthesis effect.
• GDuckDly
  GDuckDly is a digital delay that allows the wet signal to be compressed.
• 
  GSnap is an auto-tune effect.
• GBand
  GBand is a resonant band-pass filter.
• GLow
  GLow is a resonant low-pass filter.
• GComp2
  GComp2 is a simplified compressor that also includes lo- and hi-cut filters.
• GMulti
  GMulti is a three-band compressor with stereo enhancement.
• GDelay
  GDelay is a digital delay effect, with the option to feed the resulting signal.
• Gsmith2
  GSinth2 is a monophonic VSTi with three oscillators.
• GSinth
  GSinth is a monophonic VSTi with three sine oscillators.
• GGain
  t's a volume knob. A knob to control volume. You know, also known as
• GGate
  GGate is a noise gate.
• GTune
  GTune is a chromatic instrument tuner which operates much like similar hardware.
• GClip
  GClip is a wave-shaping signal clipper.
• GMax
  GMax is a maximizing limiter.
• GFader
  It's a volume knob. A knob to control volume. You know, also known as
• GRevDly
  GRevDly is a delay effect that plays the delayed signal in reverse.
• GNormal
  GNormal tries to remedy denormal problems.
• GComp
  GComp is a general-purpose compressor that offers a host of very useful features