GMulti 1.0 Download

GMulti 1.0 Description

"GMulti is a three-band compressor with stereo enhancement."

Editor: GMulti is a three-band compressor with stereo enhancement and advanced visual feedback.

The input signal is split at user-defined frequencies into three bands. Each of these bands can be compressed independently and have its stereo width altered before being mixed back together.

Hints
Bass frequencies are not directional, so it is usually preferable to share these powerful frequencies Between speakers. (Some speaker systems take advantage of this fact by taking the bass load from the signal and sending it through a single, purpose-built 'sub' speaker). You can use the width control to 'Collapse' the stereo image of the bass band so that it is centred.
You can use the mute switches listen to bands individually or in any combination. This can be a great help when configuring the compression for each band.
Interface


Each knob is laid out the same way for consistent and easy reference. Above each one, its function is labelled. Below each is a numerical readout of its value. There is also a waveform display and a gain reduction meter for each band.

Gain: This knob adjusts the gain applied to the signal before it enters the compression stage.

Low Cut: Configure the high-pass filter. Anything below this frequency is cut. Turning the dial down to the minimum will disable the high-pass filter.

freq 1 and Freq 2: The cross-over frequencies. The first band is defined as anything up to Freq 1. The second band is defined as anything between Freq 1 and Freq 2. And the third band is defined as anything above Freq 2.

Thresh: The compressor Threshold. If the level for a band rises above its threshold, compression will be applied.


Ratio: The amount of compression to apply. The level of a band will be reduced according to this ratio whenever it exceeds the relevant threshold.


Attack: The speed at which compression will take effect after the signal level rises above the threshold. you can free download GMulti 1.0 now.

GMulti 1.0 Keywords

GMulti 1.0 Related Software

• GDelay
  GDelay is a digital delay effect, with the option to feed the resulting signal.
• GChorus
  GChorus is a traditional chorus effect.
• GRevDly
  GRevDly is a delay effect that plays the delayed signal in reverse.
• GClip
  GClip is a wave-shaping signal clipper.
• GMax
  GMax is a maximizing limiter.
• GLow
  GLow is a resonant low-pass filter.
• GMulti
  GMulti is a three-band compressor with stereo enhancement.
• GGrain
  GGrain is a granular resynthesis effect.
• GDuckDly
  GDuckDly is a digital delay that allows the wet signal to be compressed.
• GFader
  It's a volume knob. A knob to control volume. You know, also known as
• GTune
  GTune is a chromatic instrument tuner which operates much like similar hardware.
• GNormal
  GNormal tries to remedy denormal problems.
• GGate
  GGate is a noise gate.
• GComp2
  GComp2 is a simplified compressor that also includes lo- and hi-cut filters.
• GSinth
  GSinth is a monophonic VSTi with three sine oscillators.
• GGain
  t's a volume knob. A knob to control volume. You know, also known as
• Gsmith2
  GSinth2 is a monophonic VSTi with three oscillators.
• GComp
  GComp is a general-purpose compressor that offers a host of very useful features
• GBand
  GBand is a resonant band-pass filter.
• 
  GSnap is an auto-tune effect.